Thursday, December 27, 2012

Crochet android toy





Size:
  • Approximately 7" (18 cm) tall
Materials:
  • Worsted weight yarn in Green and White.
  • Suggested Hook Size: F (3.75 mm)
  • 12 mm two-piece black eyes or eyes of your choice.
  • Fiberfill stuffing
Optional:
  • Extra pair of two-piece eyes (9 mm) for arm joints.
  • Weighted stuffing for legs.
  • Plastic Canvas for base of legs.
Notes:
  • Android worked in continuous spirals.
  • Use a stitch marker to mark the beginning of each row. Move stitch marker up each time you start a new row.
Color Code:
  • MC: Main Color (Green)
  • CC: Contrast Color (White)

Body

With MC make a magic ring.

R1: 6 sc in magic ring. (6 st)
R2: 2 sc in each stitch around. (12 st)
R3: (2 sc in next stitch, sc in next) 6 times (18 st)
R4: (2 sc in next stitch, sc in next 2 st) 6 times (24 st)
R5: (2 sc in next stitch, sc in next 3 st) 6 times (30 st)
R6: (2 sc in next stitch, sc in next 4 st) 6 times (36 st)
R7: (2 sc in next stitch, sc in next 5 st) 6 times (42 st)
R8: (2 sc in next stitch, sc in next 6 st) 6 times (48 st)
R9-13: 1 sc in each stitch around (48 st)
R14-15: Change to CC 1 sc in each stitch around (48 st)

If you’re using two-piece animal eyes, you should insert them now. I put mine between rounds 8 and 9 about 9 stitches apart. The eyes should be on the opposite side of the head from where you begin each round.

R16-31: Change back to MC 1 sc in each stitch around (48 st)

If you’re going to make the arm joints using two-piece animal eyes, you should make the arms now and then attach them to the body with the eyes before you start stuffing your Android. If you’re going to thread-joint the Android’s arms then you should stuff the Android almost full now and then continue closing him up.

R32: (invisible decrease, 1 sc in next 6 st) 6 times (42 st)
R33: (invdec, sc in next 5 st) 6 times (36 st)
R34: (invdec, sc in next 4 st) 6 times (30 st)
R35: (invdec, sc in next 3 st) 6 times (24 st)
R36: (invdec, sc in next 2 st) 6 times (18 st)
R37: (invdec, sc in next 1 st) 6 times (12 st)

Finish stuffing the body.

R38: (invdec) 6 times (6 st)

Fasten off. Stitch the hole closed and weave in the end of the yarn.

Antennae (Make 2)

With MC ch 5

R1: sl st in 2nd chain from hook and in each remaining chain. (4 st)

Cut yarn, leaving a long yarn end. Draw end through last loop and pull tight to fasten off.

Sew on to the top of the Android head. The left antenna should line up with the inside corner of the left eye, the right with the inside corner of the right eye.

Arms (Make 2)

With MC make a magic ring.

R1: 6 sc in magic ring. (6 st)
R2: 2 sc in each stitch around. (12 st)
R3-13: 1 sc in each st around (12 st)

If you are making the Android with two-piece animal eyes then now is the time to put the front of the eye in the arm and attach it to the body. (Which you left open at R31)

After you attach the arm to the body, stuff the arm.

If you aren’t using the two-piece animal eyes for joints, then disregard the eye-joint instructions and just stuff the arm. (The arm should be about 6.5 cm long.)

R14: (invdec) 6 times (6 st)

Fasten off. Stitch the hole closed and weave in the end of the yarn.

Once you’ve made both arms, you can attach them to the body by thread-jointing them on. I put my Android’s arms a little too high. They should be attached below the white line around the Android’s neck.

Legs (Make 2)

Option 1

The first option for the legs is to make your Android stand. To make these you need the weighted stuffing and the plastic canvas. You might also need the toe-ends of a pair of stockings if you want to make sure the plastic pellets don’t fall through the holes between the stitches in the legs.

With MC make a magic ring.

R1: 6 sc in magic ring. (6 st)
R2: 2 sc in each stitch around. (12 st)
R3: (2 sc in next stitch, sc in next) 6 times (18 st)
R4-10: 1 sc in each stitch around (18 st)

Fasten off, leaving a long yarn end. Cut a piece of plastic canvas to make a flat base for the Android’s foot. Put the canvas in the bottom of the foot. Stuff the leg with weighted stuffing. If you don’t put the pellets in the toes of the tights or in sewing bags, then put a little fiberfill stuffing in over the top of the pellets to keep the pellets from escaping while you sew the leg to the Android body.

When you’ve made both legs, sew the legs to the body. They should be in the middle of the base of the body about 2 cm apart.

Legs (Make 2)

Option 2

If you don’t want your Android to be able to stand on his own, then you can make the legs look more like the real Android legs. For these legs you just need ordinary fiberfill stuffing instead of the weighted stuffing. (The legs should end up being about 3 cm tall.)

With MC make a magic ring.

R1: 6 sc in magic ring. (6 st)
R2: 2 sc in each stitch around. (12 st)
R3-7: 1 sc in each st around (12 st)

Fasten off, leaving a long yarn end. Stuff the legs and sew them on. They should be in the middle of the base of the body about 1 cm apart.

Monday, December 24, 2012

Baby Chicky Amigurumi



Head:
make 1 piece with your choice of yarn color. Work from top to bottom.
Rnd1: Make magic ring and 6sc in ring (6)
Rnd2: 2sc in each st around (12)
Rnd3: *Sc in next st, 2sc in next st*, repeat * around (18)
Rnd4: *Sc in next 2 st, 2sc in next st*, repeat * around (24)
Rnd5: *Sc in next 3 st, 2sc in next st*, repeat * around (30)
Rnd6: *Sc in next 4 st, 2sc in next st*, repeat * around (36)
Rnd7-14: Sc in each st around (36)
Rnd15: *sc in each of next 4 st, dec 1*, repeat * around (30)
Rnd16: *sc in each of next 3 st, dec 1*, repeat * around (24)
Rnd17: *sc in each of next 2 st, dec 1*, repeat * around (18)
Rnd18: *sc in next st, dec 1*, repeat * around (12), finish off with a long tail for sewing.
Stuff polyester firmly.
 

Body: make 1 piece with your choice of yarn color. Work from bottom to top.
Rnd1: Make magic ring and 6sc in ring (6)
Rnd2: 2sc in each st around (12)
Rnd3: *Sc in next st, 2sc in next st*, repeat * around (18)
Rnd4: *Sc in next 2 st, 2sc in next st*, repeat * around (24)
Rnd5-10: Sc in each st around (24)
Rnd11: *sc in each of next 2 st, dec 1*, repeat * around (18)
Finish off with a long tail for sewing. Stuff polyester firmly.


Wings: make 2 pieces with your choice of yarn color.
Rnd1: Make magic ring and 6sc in ring (6)
Rnd2: 2sc in each st around (12)
Rnd3: *Sc in next st, 2sc in next st*, repeat * around (18)
Rnd4: Sc in each st around (18)
Finish off with a long tail for sewing (as shown in the photos).
http://www.craftpassion.com/wp-content/uploads/2011/06/chick-wing-amigurumi.jpg


Mouth:
make 1 piece with your choice of yarn color.
Rnd1: Make magic ring, 8sc in ring (8) and join with slst.
Finish off with a long tail for sewing.


Legs:
make 2 pieces with your choice of yarn color.
Rnd1: Make magic ring, 10sc in ring (10) and join with slst.
Finish off with a long tail for sewing.


Finishing:
Install plastic eyes, sew mouth to the head.
Sew head to body, then wings and legs.
Glue the ribbon to the neck.

Monday, November 19, 2012

Sweater Baby


Hasil terbaru sweater baby untuk kawan opis, comel pula bila siap combinasi kaler dia.....

Monday, October 29, 2012

Mari Belajar simbul pula

Salam,

Dalam menghasilkan crochet terdapat 2 kaedah iaitu...arahan dan simbol.
selama ni aku lebih kepada arahan dan kurang faham dalam kaedah bacaan simbol.
Jadi aku letak simbol crochet ni sebagai rujukan aku nanti.

simbol crochet

Thursday, October 18, 2012

Bootees Patern


MEASUREMENTS
fits foot (approx) 8(9.5) cms / 3(4) ins

ABBREVIATIONS
St/s - stitch/es
rep -repeat
ch -chain
dc - double crochet (US Single crochet)
slst - slip stitch
tr - treble (US - double crochet)
htr - half treble
sp - space
dec - decrease (insert hook and draw up a loop, insert hook again into next stitch, draw up another loop, 2 loop on hook, draw through both loops.)
inc -  increase ( work 2 dc into one st)

Create bootees

Sole is work in rounds not rows.
Using 3.5mm crochet hook (US E-4)(UK 9) and make 8(12) ch.
1st round - last 2ch count as 1tr, 3tr in 3rd chain chain from hook,*1tr in each following ch for the next 4(8) sts*, 7tr in last ch, rep * to *, 3tr in next ch, join with sl st to 2nd ch of beginning 2ch. 22(30) sts.
2nd round - ch 3(count as 1tr),1tr in same sp, 4tr in next st, * 1tr in each following st for the next 8(12) sts*, 4tr in next st, 3tr in next st, 4tr in the next st, rep * to *, 4tr in the next st, 1tr in same space as beginning 3ch, join with sl st to 3rd ch of beginning 3ch. 38(46) sts.
fasten off if want to change another color.

Note : This is now centre back of sole, mark with stitch maker or exess yarn.

BOOTEE UPPER
Note : 1st round only worked tbl (through back of loop / stitch)
1st round - 1ch(count as 1dc), 1dc in each st for next 14(18) sts, 2dc in next st, 1dc in each st for next 2st, 2dc in next st, 1dc in each st for next 13(17) st, join with sl st to 1st ch of beginning 1ch. 42(50) sts.
2nd round - 1ch (count as 1dc), 1dc in each st, join with sl st to 1st ch of beginning 1 ch.
3rd round - 3ch (counts as 1dc), 1tr in each st for next 16(20) sts, tr2tog 5 times, 1tr in each st for next 15(19) sts. join with sl st to 3rd ch of beginning 3ch. 37(45) sts.
4th round - 1ch (counts as 1dc), 1dc in each st for next 12(16) st, *dc2tog, 1dc, dc2tog*, 1dc in each st for next 3st, rep * to *, 1dc in each st for next 11(41) sts.
5th round - change yarn color, 1dc in each st for next 10(14) sts, 1htr, * tr2tog, 1tr* 3 times, tr2tog,1htr, 1dc in each st for next 9(13) sts, join with sl st to 1st ch of beginning 1ch. end

BOOTEE STRAP - strap is using rows not rounds.
Mark 6(10) sts each side of center back st along top bootee edge.
7ch, sl st into 1st ch to form ring, 8(12) ch,(with toe facing) 1 dc into marked st on left side facing, 1dc in each following st to next marked st, 1dc in market, 15(19) ch, turn, sl st into 7th ch from hook to form ring, 1dc in each ch, 1dc in each st back to first ring. end

Finishing
Using yarn needle sew in all loose ends inside bootee and on bootee straps. Using coordinating yarn sew on buttons below colored edging. Cross strap and mark position first.

Friday, October 12, 2012

GRANNY WHITE HAT

Pattern for GRANNY WHITE HAT (in English)
Yarn: Medium, worsted
Needle: 4mm or 5mm (depending on how tight or loose you crochet. For better results, check the suggested number for the yarn you will use)
Size: 4 yrs to adult
Baby: skip rows 3 and 4 (for the rib part, you must have 36DC)
If you use baby yarn (fine), follow the instructions of a toddler size.
Toddler size: skip row 4, and on the 5th row you must skip a st after the 3DC.  For the rib part, you must have 48DC.


Ch = Chains
Sc = simple crochet
DC = Double crochet
FpSt = Front-post st
BpSt = Back-post st
Slst = slip stitch

Magic ring ( or ring of 4 chains)
1)  12DC on magic ring.
2)  Chain 3 (counts as first DC), and 1 DC on same st.  Then reperat: *2DC on each st * (Total: 24DC)
3)  Chain 3  (counts as first DC).  2 DC on next st.  Then follow this pattern all around: *1DC on the next st, and then 2 DC together on the next st* (Total: 36DC)
4)  Chain 3, and 1 DC in next st.  Then repeat all around: *2 DC + 2 DC on each st below* (Total: 48 DC)
5)  Chain 3  (counts as first DC) , and DC on next 2 st.  Repeat all around: *Chain 1, DC in next 3 st*  (Total: 48 DC and ch)
End with sc on top of the first 3ch (This will leave the st in place to start  the granny pattern on the following row.  I do this instead of the traditional way, which ends with a chain and slip st, and then make slip sts until reaching the next chain-space.)
6-12> Chain 3  + 2 DC (on the space below, between the group of 3 DC´s).  Now repeat the following all around: *Chain 1 + 3 DC on 1ch-space below*, end with sc on top of the first 3 chains.
13> DC in each DC of prior row and 1 DC in each chain 1 space (Total: 64 DC) (Total: 64 DC)
14-16>  For the rib part:  Chain 2 (counts as first BpSt) + * 2 FpSt + 2BpSt* end with sl stitch, and cast off.

Optional: add a flower.

Monday, August 13, 2012

Arnab lagi

Patern nie beli kat etsy...memula memang susah nak faham arahan dia..baca banyak kali juga la. so setelah testing..buka..testing lg...berjaya juga menghasilkan arnab nie...



Tuesday, July 31, 2012

Kopiah

Salam,
ada la sorg akak opis nie mintak kopiah budak tp tak menyempat2 nak try buatnya..jumpa je patern simpan dulu kat blog nie..... bila la kan nak cuba


Material:
hook size
benang

saiz: kanak-kanak 7-10 tahun

note:
dc-double crochet
sc-single crochet
ch-chain
(setiap kali habis satu round, slip stitch pada atas sc/dc di permulaan round, dan chain 1 (single crochet) atau chain 2(double crochet). sc/dc pada stitch yang sama untuk memulakan round baru)

Round 1: 8 sc (8)
Round 2: 2dc in each sc (16)
Round 3: *2 dc in each of the next 2dc, chain 1* Repeat * 7 times (32 dc, 8 chain 1 spaces)
Round 4: *dc, 2 dc in each of the next 2dc, dc, chain 1* Repeat 7 times (48 dc, 8 chain 1 spaces)
Round 5: *2dc, 2dc in next stitch, 3dc, chain 1* Repeat 7 times (56 dc, 8 chain 1 spaces)
Round 6: *3dc, 2dc in next stitch, 3dc, chain 1* Repeat 7 times (64 dc, 8 chain 1 spaces)

(tambah benang putih)
Round 7: *3dc, 2dc in next 2 stitches, 3dc, change yarn colour(putih), dc in chain 1 space, change yarn (kelabu)*.Repeat *7 times. (88)
(how to change yarn colour-refer here)
Round 8: slip stitch, ch 2, *8dc, change yarn colour(putih). dc, 2dc, dc, change yarn colour again (kelabu)*. Repeat *7 times (96)
Round 9: slip stitch, ch 2, *6dc, change yarn colour. 2dc, 2dc in each of the next 2 stitches, 2dc, change yarn colour again* Repeat 7 times (112)
Round 10: slip stitch, ch 2, *4dc, change yarn colour. 4dc, 2dc in the next stitch, 4dc, change yarn colour again* Repeat 7 times (120)

Tak ada penambahan stitch lagi
Round 11: (putih) dc in each stitch (120)
Round 12 :(kelabu) dc in each stitch (120)

kait nama:
Round 13-17: Rujuk entry ini untuk mengait nama
Round 18: (kelabu) dc in each stitch (120)

akhirnya jadi jugak kopiah nie..tp nie untuk kanak-kanak bawah setahun.....

Saturday, July 7, 2012

arnab lagi....

Salam,
aku dah jadi penternak arnab berjaya skang nie...tapi arnab nie tak boleh di makan...cubit-cubit....picit-picit jek boleh....agak-agak tengah geram ke kan boleh aa tempat melepas geram cam mak nini (terpengaruh cite shin chan).

kalau terlebih rajin boleh la try amigurumi yang lain kat link ini greatamigurumi.blogspot.com .

Thursday, June 28, 2012

brooch bunga

Cara -cara untuk buat brooch bunga crochet :

Bahan -bahan dia

1. Gam pistol
2. Pin
3. Bunga crochet saya guna bunga ros





langkah 1
Gam kan pin menggunakan gam pistol.

 Langkah 2
Lekatkan bunga atas pin yang diletak gam tadi.

 Tada....dah pun siap....simple kan boleh digunakan untuk bunga penaggah ek panggil dia utk kenduri kawin tu.....boleh juga dibuat brooch tudung.....


Tuesday, June 19, 2012

Amigurumi rabbit

Salam,
agak lama tidak update blog nie....kemalasan melanda......huhuhu....hasil terkini ialah amigurumi . Ini pun buat sebab ada kawan mintak buatkan untuk promosikan kat blog dia....


Sangat jeles dengan bloger yang hari-hari update blog dia...tapi apakan daya nie jek aku termampu.......ada lagi orang tempah arnab nie...pastu bawak lerr gi opis..ropanya ramai yg berminat....abis semua cam jual pisang goreng.....

Monday, May 21, 2012

Sarung bantal

Hasilnya...


paternya....



Link untuk buat belakangnya ...

crochet-cushion-back-tutorial









Easy comfy crochet slippers

Hasilnya ....


Di bawah ni adalah arahan buatnya mcm mana.....
ukuran asal adalah size 9 inci panjang dan 8*1/2 inci keliling.
Tapi dia jenis yang boleh mengembang macam stokin.
Untuk size yang lebih besar boleh guna double benang dan guna size jarum K hook, atau tambah rows. 2 lagi rows di bhgn toe dan 2 rows di bhgn heel.
Untuk size kecil pula boleh guna size hook yang kecik sikit spt 3 mm atau 4 mm .
selamat mencuba...!!!

Round 1: Chain 4, 11 double crochet in 4th chain from hook, join with slip stitch around beginning chain 3 . Round 2: Chain 3, 1 double crochet in same space, 2 double crochet in top of remaining 11 stitches of this round, join with slip stitch around beginning chain 3.....(24 stitches for rest of pattern at the completion of each round or row).
Round 3: Chain 3 *front post double crochet around next double crochet, double crochet in top of next double crochet,repeat from * slip stitch around beginning chain 3....
Rounds 4 - 11: Repeat round 3.............
From this point you will work in rows.... Heel Section..this part is worked in rows.. (you will have 23 stitches for entire heel section)
Row 12: Chain 3, * front post double crochet around next double crochet, double crochet in top of next double crochet,repeat from *, end with a double crochet in top of the last plain double crochet, leaving the last front post double crochet unworked. turn....
Row 13: Chain 3 *back post double crochet around next double crochet, double crochet in top of next double crochet, repeat from* to chain 3, double crochet around the chain 3, turn....
Row 14: Chain 3*front post double crochet around next double crochet, double crochet in top of next double crochet, repeat from* to chain three, double crochet around the chain 3, turn....
 Row 15-20: Repeat rows 13 & 14....
Slip Stitch your slipper together. You will now turn it so that you will work this round; around the ankle. Chain 2, work a half double crochet in each space around the ankle section. Slip stitch together. Leaving a long enough length of yarn to sew the heel of your slipper together, cut the yarn. Sew the heel together, tuck in ends. Make second slipper.
For Ties: Chain 50, slip stitch to middle stitch at the ankle on back of slipper, chain 52 stitches, cut yarn and pull it through the last chain. Trim the ends of yarn on the ends of the chain.done.....

Tuesday, April 17, 2012

Owl beanie

How to Crochet an Owl beanie

Video Tutorial -


hasilnya...




Size child 2+
Hook size 4.00 mm. US G/6
Yarn, 8 ply. US 4 ply
Sewing needle
US terms used through out pattern
St’s used:
Sl st = slip stitch
Ch = chain
Sc=single crochet
Rsc= reverse single crochet
Dc= double crochet
Skill= beginner

Beginning at top of the hat:

Special notes: the 1 sc and ch 1 is the first dc of each round

Ch 5, join with sl st to first ch to form a ring,

Increases:

Row 1: work 1 sc into ring and ch 1 (this is the 1st dc), work 11 dc into the ring, join with a sl st, into the ch 1, (12 dc)

Row 2: work 1 sc and ch 1 into same space as the join, work 1 dc in same space, work 2 dc’s in each dc around, join with a sl st, into the ch 1, (24 dc)

Row 3: work 1 sc and ch 1 into same space as the join, work 2 dc in next dc, *work 1 dc in next dc, work 2 dc in next dc,* repeat from *to* to end, join with a sl st, into the ch 1, (36 dc)

Row 4: work 1 sc and ch 1 into same space as the join, work 1 dc in next dc, work 2 dc in next dc, *work 1 dc in each of next 2 dc, work 2 dc in next dc,* repeat from *to* to end, join with a sl st, into the ch 1, (48 dc)

Row 5: work 1 sc and ch 1 into same space as the join, work 1 dc in each of next 2 dc, work 2 dc in next dc, *work 1 dc in each of next 3 dc, work 2 dc in next dc,* repeat from *to* to end, join with a sl st, into the ch 1, (60 dc)


Row 6: work 1 sc and ch 1 into same space as the join, work 1 dc in each dc to end, join with a sl st, into the ch 1 (60 dc)

Row 7 to 10: repeat row 6. You can make your hat longer in length by adding more repeat rows of row 6

Adding the ear flaps:

Mark out your 10 dc’s on each side of the hat for the ear flaps as per video tutorial

First ear flap:

Row 1: join in yarn with a sl st and ch1, in same space work 1 sc and ch 1, work 1 dc in each of the next 9 dc, turn, (10 dc)

Row 2: work 1 sc and ch 1 into first dc of the row, work 1 dc in each of the next 8 dc, work 1 dc into the ch 1 space, turn, (10 dc)

Row 3: to Row 5: repeat row 2, finish off

Second ear flap:

Line up your 10 dc’s on opposite side to 1st ear flap and repeat above instructions to complete 2nd ear flap

Border: Turn hat upside down and join yarn to hat edge

Row 1: join in yarn with a sl st and ch 1, work a rsc around hat edge, see video for full instructions

Make Plaits: See video tutorial for full instructions



Making the Owl Eye’s: 4 colors needed…Make 2


Ch 5, join with sl st to first ch to form a ring,

Increases:

Row 1: (black) work 1 sc into ring and ch 1 (this is the 1st dc), work 11 dc into the ring, join with a sl st, into the ch 1, (12 dc) change color


Row 2: work 1 sc and ch 1 into same space as the join, work 1 dc in same space, work 2 dc’s in each dc around, join with a sl st, into the ch 1, (24 dc) change color

Row 3: work 1 sc and ch 1 into same space as the join, work 2 dc in next dc, *work 1 dc in next dc, work 2 dc in next dc,* repeat from *to* to end, join with a sl st, into the ch 1, (36 dc), finish off leaving a long tail to sew eye onto hat

Eye Lashes: Worked across opposite arch to the long tail

Row 1: join in yarn with a sl st and ch1, work 1 dc in next dc, work 2 dc in next dc, work 1 dc in each of the next 2 dc’s, *work 2 dc in next dc, work 1 dc in each of the next 2 dc’s,* repeat from *to* approx 2 more times for width desired

Attach Eyes:

Lay hat flat and sew on eyes to front of the hat in an even manner

See video tutorial for color choices and eye placement


Beak: embroider on as per video

Tuft’s: tie in place as per video

Wednesday, April 11, 2012

Alas gelas

Instruction

Faundation Ring :
6 ch and join with sl st to form a ring

Round 1:
2 ch, 23 dc round into the ring, close with a sl st(total of 24 dc)

round 2:
4 ch (count as 1 dc +2 ch) 1 dc in the closing sl st of the previous row
1 ch * skip 2 ch, in the next ch : 1 dc, 2 ch, 1 dc, 1 ch * reapeat 7x from * to *. Close round with a sl st in the 2nd ch(of4) of the start.

Round 3:
2 ch(counts as 1 dc), 1 dc, 2ch, 2 dc under the 2 ch of the previous row, 1 sc under the 1 ch * 2 dc, 2 ch, 2 dc as before, 1 sc as before *. Reapeat 7x from * to *. Close with a sl st in 2nd ch (of 2) of the start.

Round 4:
No build up with ch as before, directly 3 dc, 1 ch, 3dc under the 2 ch of the previous row, 1 sc to the left and right of the sc of the previous row. Reapeat 8x and close with a sl st in the 1 st ch of the previous row.

bind off.

hasilnya........

Tuesday, April 3, 2012

baby booties

Kasut baby la pulak kan....nak save dianya link je nie...kasutnya tgh dalam proses...semalam baru dapat sebelah so hari ni sambung lagi sebelah...dah siap kang upload sini...
link dia supaya tidak lupa
Part 1
Part 2
Part 3

hasilnya.....



 

Monday, April 2, 2012

amicomo4-1 Bucket Hat

first time buat crochet menggunakan diagram...senang gak...tp di tunjuk ajar oleh kawan yang biasa guna diagram...sbb simbol-simbol dia bukan faham sangat. tp alhamduliallah jadi juga dalam masa 3 hari. Hasilnyaa.......



siap model lagi....

ada model boy sebagai penyeri ...........

Sunday, March 25, 2012

kod benang untuk bunga


Dah lama tak update apa-apa dalam blog nie...almaklumla tgh mabuk kepayang...memang tahap tak leh masuk makanan apa-apa...sihat je ramai plak yang order bunga. so untuk memudahkan pemilihan kaler untuk bunga saya dah buat kod kaler bunga so senang la nak pilih kaler mana yang berkenan...sebab selama nie pelanggan cakap je nak kaler apa...saya cari lerr ikut mata memandang kan kaler benang yang sesueeiii....

Tuesday, January 17, 2012

patern bunga lagi

belum try lagi patern bunga nie.....tapi save dulu la kan dianya patern....kang nak buat senang....


Flower_bags_2_027
1st round Ch1, work 15sc into circle. Ss into first ch.
2nd round Ch4, * skip 1sc, 1dc into next sc, ch1, rep from * 6 times more. Join with a ss into the 3rd of the first 4ch. Break off the first color.
3rd round Join the color you wish to use for the petals to first ch loop with a ss, ch1. Into same ch loop, work 1dc, 1tr, 1dc, 1sc, * into next ch loop, work 1sc, 1dc, 1tr, 1dc, 1sc, rep from * into each ch loop, making 8 petals. Join with a ss into first ch.
4th round Working behind the petals made in the 3rd round, make ss between 2 petals, ch 4, * 1sc between next 2 petals, ch3, rep from * to end. The ch loops made lie behind the petals of the previous row. Join with a ss into first ch.
5th round Make the next row of petals by working 1sc, 1dc, 2tr, 1dc, 1sc into each ch loop. Join with a ss into first sc.
6th round Working again behind the petals made in the previous round, make ss between 2 petals, ch 5, * 1sc between the next 2 petals, ch 4, rep from * to end. Join with a ss into first ch.
7th round Into each ch loop, work 1sc, 1dc, 3tr, 1dc, 1sc. Join with a ss into first sc. Fasten off, darn in ends, and voilĂ  ...a pretty flower, all done! But beware, making them can be addictive...

ch = chain; dc = double crochet; lp = loop; rep = repeat; sc = single crochet; ss = slip stitch;tr = treble crochet.

Monday, January 9, 2012

bunga lagi


hahaha asik buat bunga je kan......kawan la nie...asik tempah bunga untuk dia buat hairband la....brooch la...kita layan kan je la....

brooch bunga


tempahan brooch untuk kawan opis. 3 ketui rm 5 besar agak-agak duit 20 sen. ni la hasilnyaa....